关于薛定谔算子的极点散射: 基于狄利克雷级数的视角

本文讨论了在实轴上具有紧支集的势的薛定谔算子的极点散射问题. 本文旨在将狄利克雷级数理论与散射理论相结合, 文中运用了Littlewood的经典方法得到关于极点个数的新的估计. 本文首次将狄利克雷级数方法用于极点估计, 由此得到了极点个数的上界与下界, 这些结果改进和推广了该论题的一些相关结论.     

High-efficiency absorption of low NOX concentration in metallurgical flue gas using a three dimensional printed large-flow microstructured reactor

In the process of nitric acid dissolving precious metals, a large amount of NOx exhaust gas will be produced. This research aims at the development of a new method for the removal of low-concentration nitrogen oxides from metallurgical flue gas. In this process, a printed three-dimensional large-flow microstructure reactor and urea solution are used for the removal of NOx, which facilitates the greater efficiency of denitrification(≥94%). Urea plays an important role in the redox of NO₂, such as NO₂ is reduced to N₂ in solution. Both the gas and the liquid phase simultaneously react in the microchannels of the microfluidic reactor. The channels allow the proper mixing of urea and NaClO₂ during the flow which efficiently removes NO_x at low concentrations. The optimum condition for high denitration efficiency is outlined: the urea solution with 3%,temperature of the mixed solution is 293.15 K, gas–liquid flow mass ratio is 1:1, pH value (8.0–10.0), C_NaClO2 = 0.02 mol/L. This work successfully describes the use of a microfluidic reactor to enhance and maintain the denitration efficiency. This work describes how to successfully enhance and maintain the denitration efficiency while using a printed three-dimensional large-flow microstructure reactor.     

银负载量对网状TiO_2柔性薄膜电极储锂性能的影响

采用水热法结合银镜反应制备出一系列不同Ag负载量(2.2%、4.0%、6.4%,w/w)改性的3D纳米网状结构Ag@Ti O2薄膜电极。利用电感耦合等离子体技术(ICP)、X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDX)等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在Ti O2纳米线表面。电化学测试数据则表明,4.0%(w/w)负载量的Ag@Ti O2相比于未改性和其他负载量的Ti O2纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 m A·g~(-1)的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 m Ah·g~(-1),在200 m A·g~(-1)下循环80次后容量保持率仍能达到99.8%。     

锰氧化物中氧空位的构建及其催化氧化苯系物作用机制研究进展

作为一种过渡金属氧化物,锰氧化物以其多晶型、储/释氧能力强、蕴含丰富氧物种、结构缺陷可控等优点被广泛应用于苯系物的热催化氧化。其中,具有众多特性的氧空位能有效促进苯系物的完全催化氧化,因而成为各界研究的焦点。我们综述了常见的氧空位构建方法及表征技术,并总结了在苯系物催化氧化过程中,锰氧化物中氧空位的几种重要作用机制对催化活性和抗水性能的积极影响。最后文章对氧空位构建新方法、形成机理、具体过程及其在锰氧化物热催化氧化苯系物领域中的应用进行了总结和展望。     

Molar absorptivities of U(VI), U(IV), and Pu(III) in nitric acid solutions of various concentrations relevant to developing nuclear fuel recycling flowsheets

Journal of Radioanalytical and Nuclear Chemistry - The activity and osmotic coefficients of fission product systems CsOH?+?CsCl, CsOH?+?CsBr and CsOH?+?CsI are...     

Composition operators on Hardy spaces of Riemann surfaces

Our purpose is to define composition operators acting upon Hardy spaces of Riemann surfaces. In terms of counting functions related to analytic self-map on Riemann surfaces, the boundedness and compactness are characterized.     

浅谈高等教育心理学在大学物理实验教学中的应用——在牛顿环实验中的尝试

随着现代教育的发展,关注大学生的学习心理研究,提高全体学生的学习效率和效果,教育心理学逐步走入课堂,越来越被教育工作者所重视。许多教师广泛采用教育心理学的原理和理论结构来指导自己的教学实践,并且取得了令人满意的成效。本文采用理论联系实际的方法,对高等教育心理学在牛顿环实验教学中的应用进行了有益探索。     

酸性AlCl3-BMIC离子液体中的铝阳极溶解

采用线性扫描伏安法研究了Lewis 酸性AlCl₃-BMIC (BMIC: 1-butyl-3-methylimidazolium chloride)离子液体中铝电极的溶解. 铝电极在阳极极化时出现了钝化现象, 钝化是由于在铝电极表面形成了固体AlCl₃钝化膜造成的. 铝的电化学溶解过程可以依次分为三个区: 电化学控制区、过渡区和钝化区. 在电化学控制区, 铝的电化学溶解速率随着电位的正移而逐渐增加; 在过渡区, 由于电极表面AlCl₄^-和Al₂Cl₇^-浓度发生改变而析出固体AlCl₃使得铝电化学溶解速率随着电位的正移而逐渐减小; 当钝化膜形成之后, 铝的电化学溶解速率不再随着电位的正移而发生改变, 铝溶解进入钝化区. 增加搅拌、升高温度、降低离子液体AlCl₃摩尔分数都可以增加铝溶解阳极极限电流密度.     

双空孔间距对爆破槽腔断面大小的影响

为了探究空孔间距对巷道掘进掏槽爆破效果的影响,基于大红山铜矿某巷道建立有限元数值模型,计算双大直径空孔不同布孔间距条件下的掏槽爆破成腔断面积,并对最优方案开展现场验证。研究结果表明:空孔间距d_v=15 cm时,槽腔断面积为0.1641 m2;当d_v增加到d_v=25 cm时,槽腔断面积为0.2116 m2,断面积增大28.94%;当 d_v增加到35 cm时,槽腔断面面积为0.2436 m2,断面积增大15.1%;但当d_v增大到45 cm时,槽腔面积为0.1740 m2,断面积减小17.8%;当d_v增大到55 cm时,槽腔面积为0.0951 m2,断面积减小45.3%。对成腔断面积最大的空孔间距d_v=35 cm的布孔方案进行现场试验,2号现场试验测得槽腔断面宽度、高度及断面积分别比模拟结果小4.0%、3.4%和4.98%,多次试验与模拟结果误差均在5%以内,能够为地下巷道掏槽爆破成腔体积预测的数值方法构建提供数据参考。     

Bifurcation analysis and control of chaos for a hybrid ratio-dependent three species food chain

In this paper, a hybrid ratio-dependent three species food chain model with time delay is studied by using the theory of functional differential equation and Hopf bifurcation, the condition on which positive equilibrium exists and the quality of Hopf bifurcation are given. Chaotic solutions are observed and are controlled by delay parameter. Finally, we indicate that when the delay passes through certain critical values, chaotic oscillation is converted into a stable state or a stable periodic orbit.